Roll pins not working on the KISS Flight Controller

User helping User!

Roll pins not working on the KISS Flight Controller

Postby Prowler » 29 May 2016 00:13

When I connect all four channels to the FC, the throttle value in the GUI rapidly switches between min throttle and max throttle while the roll value stays still at 1500. I've made sure that all the wires are connected in the correct order and checked the channels on the receiver against the pins on the FC and vice versa. All the channels on the receiver are functioning. The Throttle, Pitch and Yaw pins on the FC are functional and display the correct value in the GUI as I move the transmitter stick. The only one that doesn't work are the roll pins. I tried the roll pin on its own and connected it to the corresponding channel on the receiver and the roll value bar in the GUI was non-responsive to my stick movements. It just remained at 1500.

I've tried everything and nothing seems to work. I even re-soldered the pins and it made no difference. I've checked for shorts and there aren't any. I'm beginning to think I received a faulty board :(

Does anyone know what this could be?
Prowler
 
Posts: 1
Joined: 28 May 2016 21:11

Return to Problems

Who is online

Users browsing this forum: No registered users and 2 guests

cron