Motor Sync problem

User helping User!

Motor Sync problem

Postby spun » 28 Apr 2016 17:21

Hello i am having a problem my motors are not syncing and they are throttling up regardless if airmode is on or off..
So whats wrong with my kiss fc? heres a short video of the sync problem i am having, the problem happens regardless of which esc is plugged into what motor. I switched motor 1 with motor 3 and i have same issue, switched motor 1 with motor 4 and same issue, etc, I am using Kiss fc flashed with 1.02, 30amp littlebees with oneshot and emax 2205 2300kv motors
Anyone know how to fix this? Or what i have wrong? How do i fix this?

https://www.youtube.com/watch?v=7zSKqBQDCbY

With airmode disabled
https://www.youtube.com/watch?v=OEwoaM1r6KE
spun
 
Posts: 1
Joined: 28 Apr 2016 17:16

Re: Motor Sync problem

Postby WoooSaaaW » 21 May 2016 09:38

I'm having this exact same issue, the motors wont sync unless i set the PIDS to 0. Have you found a solution or is this a defective board?

My setup:
KISSFC 1.03
EMAX RS2205 2600kv
RotorGeeks RG20

https://www.youtube.com/watch?v=tJzyPeNrI0Y
WoooSaaaW
 
Posts: 1
Joined: 21 May 2016 09:35

Re: Motor Sync problem

Postby Happyman11 » 28 May 2016 17:54

I have the same problem.
Happyman11
 
Posts: 1
Joined: 28 May 2016 17:50


Return to Problems

Who is online

Users browsing this forum: No registered users and 1 guest

cron