AUTOQUAD and KISS build

Nice Builds with our Products ;)

AUTOQUAD and KISS build

Postby afernan » 03 Oct 2014 09:49

I want to show my last mount using KISS-18A ESC´s .

In summary: ABSOLUTELY AWESOM PERFORMANCES!

Super smooth flight, precise, free of vibrations and the best: a big pleasure to flight. This KISS joints perfectly with AQ board, no doubt on that.

Details of the build:
- TMotor 3110, 700kv + TM12x4 CF props
- KISS esc, 18A
- fw r429, DIMU1.1 (no quatos)
- frame: custom quad 610mm, monoblock full 3D printed, 16mm CF tube arms.
- 1175g (including FPV Tx & camera).
- Flight time:25+ min with 5000mA, 4S

Mounting of the KISS just below the motors. Used a 330uF cap inside the tube. So plenty of free space in between central plates for payload.

See more details here:
http://forum.autoquad.org/viewtopic.php?f=25&t=3762
afernan
 
Posts: 2
Joined: 02 Sep 2014 08:13

Re: AUTOQUAD and KISS build

Postby LenzGr » 07 Oct 2014 10:11

Nice job, well done!
LenzGr
 
Posts: 196
Joined: 02 Jul 2012 21:31
Location: Hamburg, Germany


Return to Builds

Who is online

Users browsing this forum: No registered users and 1 guest

cron