ESC32 firmware

Discussion about our Products. No Problems pls!

ESC32 firmware

Postby avlmche » 22 Sep 2014 11:26

Hi guys!

I've a problem with esc 32 firmware.

I've flashed the firmware, but when I check if in the esc settings tab there are all the parameters, I don't look at anything.
Moreover below the esc settings field where there is the "FW version" there is "unknown".

Could be a problem due to compatibility among the several firmwares and qgroundcontrol?

Thanks at all.
Posts: 4
Joined: 21 Jul 2014 10:10

Return to Flyduino Products

Who is online

Users browsing this forum: No registered users and 1 guest