GPS on MWC Board?

Discussion about our Products. No Problems pls!

GPS on MWC Board?

Postby westie630 » 16 Sep 2013 13:39

Hello,

A quick question - is it possible to connect an I2C GPS module to the MWC Board?

(Maybe connecting to the SDA/SCL pins on the Mini pro in parallel with a standard sensor board)

Many thanks

Westie
westie630
 
Posts: 2
Joined: 15 Sep 2013 18:04

Re: GPS on MWC Board?

Postby LenzGr » 19 Sep 2013 12:54

Connecting it to the I2C bus should not be a problem, but I wonder if there is enough memory on the controller to support GPS functions. That might be the limiting factor here...
LenzGr
 
Posts: 196
Joined: 02 Jul 2012 21:31
Location: Hamburg, Germany

Re: GPS on MWC Board?

Postby westie630 » 20 Sep 2013 22:50

Thanks LenzGr.

I am currently on a steep leaning curve and I think the best thing to do is leave the GPS until my next project (with the 2560). I am trying to learn Multiwii from the ground up and have a habit of doing things the hard way. However I had not appreciated the growing demands MultiWii had put on the processor.

All good stuff...
westie630
 
Posts: 2
Joined: 15 Sep 2013 18:04


Return to Flyduino Products

Who is online

Users browsing this forum: No registered users and 1 guest

cron