Nanowii and Bluetooth

Discussion about our Products. No Problems pls!

Nanowii and Bluetooth

Postby nicodh » 02 Aug 2012 08:36

Hello,

I'm trying to comunicate with nanowii via bluetooth (like I do with my naze boards). I hooked up a working bluetooth device (I use it on other quads) into Tx/Rx and vcc and ground next to tx/rx pins. Nothing happends. Tried inverting the connector (just in case). Nothing, no communication at all.

Is something in the config file I missed? Using multiwii 2.1.

Thanks!
nicodh
 
Posts: 1
Joined: 02 Aug 2012 08:33

Re: Nanowii and Bluetooth

Postby ronco » 02 Aug 2012 11:36

Hi,

there was no support for BT on serial 1 in 2.1 .. (USB is serial 0 on a atmega32u4)

but i got a working version now :) it is based on the current dev version so be careful . there may be untested things inside!

use this one:
MultiWii_2_1_new_serial1.zip
(114.69 KiB) Downloaded 306 times


it works with the GUI (config tool) of 2.1

and uncomment this in the config.h
Code: Select all
//#define SERIAL1_COM_SPEED 115200


then it should work ..

regards Felix
ronco
 
Posts: 50
Joined: 28 Jun 2012 23:11

Re: Nanowii and Bluetooth

Postby Cock146 » 30 Jan 2015 12:52

I hooked up a working bluetooth device (I use it on other quads) into Tx/Rx and vcc and ground next to tx/rx pins. Nothing happends. Tried inverting the connector (just in case). Nothing, no communication at all.
Cock146
 
Posts: 1
Joined: 30 Jan 2015 12:50


Return to Flyduino Products

Who is online

Users browsing this forum: No registered users and 1 guest

cron